Proxim Stratum SX3-1020A-WD Quickbridge Point-to-Point Radio
- Model: Stratum SX3-1020A-WD Quickbridge
Proxim Stratum SX3-1020A-WD Quickbridge FEATURES
- Pair of 5 GHz All-purpose unit (BSU single or SU), PN: 907-00020
- Capable of throughput up to 1Gbps
- Wide Band Radio - 5.150 – 5.850 GHz
- One 1 Gbps Ethernet with PoE in, One 1 Gbps Ethernet with PoE out, One 1 Gbps Ethernet (RJ45)
- AES 128-bit encryption is upgradeable to 256-bit
- Full tilt and swivel mounting kit included
- Two RP-SMA Connectors
- IP67-rated metal enclosures and operate from -40º to + 60º
Proxim Stratum SX3-1020A-WD Quickbridge INTRODUCTION
The Stratum X3 Quickbridge - 5GHz is a high-performance MIMO 2x2 point-to-point bridge-in-a-box solution capable of throughput up to 1Gbps. It’s an ideal option for customers who require a fast and efficient setup of medium to long-range point-to-point wireless networks. The Stratum™ X3 Quickbridge® is designed to simplify the installation of point-to-point networks and includes a bundle of two preconfigured Stratum X3 endpoints that have been paired ready for service in the field.
Both connectorized and integrated antenna models are available, and all models are housed in IP67-rated metal enclosures and operate from -40 o to + 60 °C.
Advanced Interference Management
To achieve peak performance in challenging RF environments characterized by dense unlicensed radio usage and significant interference, the Stratum X3–5GHz utilizes our highly efficient WORP® (Wireless Outdoor Router Protocol). Proxim ClearConnect®, a crucial component of WORP®, provides effective interference management.
Security
Over-the-air transmission is secured via 128-bit AES encryption, with an option to upgrade to 256-bit when ultra-high security is desired. In a WORP®-powered network, a base station autonomously handles on-demand bandwidth allocation and quality of service (QoS) settings based on the specific requirements of each client within the network.
Rugged Reliability
Stratum X3 features a robust IP67-rated metal enclosure designed to provide dependable performance over many years, even in severe conditions, including strong winds, high salt exposure, and extreme temperatures.
Proxim WORP®
WORP® is a dynamic, asynchronous protocol designed to optimize the performance of outdoor wireless point-to-point and point-to-multipoint wireless links. WORP’s asynchronous nature allows the uplink and downlink to adapt to network traffic demands dynamically.
As an Authorized Distributor of Proxim, Manufacturers Automation Inc. (ManuAuto) offers a wide variety of Industrial Automation and Communication products across North America, including Canada (Ontario, Toronto) and the US. Buy Proxim Stratum SX3-1020A-WD Quickbridge Point-to-Point Radio online at a competitive price, with on-time delivery and fast shipping services. Our certified engineers are always available to support you.
You can also find the Stratum SX3-1021A-WD Quickbridge, Stratum SX3-2020A-WD Quickbridge, and Stratum SX3-2021A-WD Quickbridge models in the Proxim Stratum™ X3 Quickbridge Series.
Proxim Stratum SX3-1020A-WD Quickbridge CERTIFICATIONS

| Wireless Radio : Interfaces | |
| Ethernet | - |
| Wired Ethernet | One auto MDI-X RJ45 1 Gbps Ethernet with PoE in, One auto MDI-X RJ45 1 Gbps Ethernet with PoE out, One auto MDI-X RJ45 1 Gbps Ethernet |
| Wireless Protocol | WORP® (Wireless Outdoor Router Protocol) |
| Extension | - |
| Management | - |
| Wireless Radio : Radio Specifications | |
| Radio Type | Point-to-Point |
| MIMO | 2x2:2 |
| Modulation | OFDM BPSK-QAM1024 |
| Frequency | 5.150 - 5.850 GHz (Subject to Country Regulations) |
| Channel Size | 20, 40 and 80 MHz (80+80 and 160 MHz via future upgrade) |
| Data Rate | - |
| TX Power | Up to 27 dBm (dual chain) |
| TX Power Control | 0 - 24 dB, in 1 dB steps. Automatic TPC with configurable EIRP limit |
| Throughput | Throughput - Dual Stream: 20 MHz: 223 Mbps, 40 MHz: 435 Mbps, 80 MHz: 755 Mbps |
| Other | Dynamic Channel Selection (DCS) based on interference detection, Dynamic Frequency Selection (DFS) based on radar signature, Automatic Transmit Power Control (ATPC) with EIRP limit support |
| Wireless Radio : Antenna | |
| Antenna Type | Two RP-SMA Connectors |
| Beam Width | - |
| Receive Gain | - |
| Transmit Gain | - |
| Wireless Radio : Network | |
| Modes | Bridging, Routing |
| IP Stack | IPv4 and IPv6 simultaneously |
| Latency | - |
| Gateway Features | DHCP Server & relay, NAT with Std ALGs, PPPoE end point with Proxy DNS |
| VLAN | 802.1Q: Management VLAN. Transparent, Access, Trunk and Mixed mode. QinQ double tagging |
| Wireless Radio : Management | |
| Remote | Telnet and SSH 2.0, Web GUI and TLS 1.3, TFTP, SNMP v1/v2c/v3 |
| SNMP | - |
| Bluetooth Low Energy | Proxim BlueConnect™ |
| Multi-Language Support | Web Interface available in English, French, Spanish and Chinese |
| Other | Syslog, SNTP and local time, Spectrum analyzer |
| Wireless Radio : Security | |
| Encryption | AES 128 (AES 256 via license upgrade) |
| Authentication | Internal MAC Address Control List, Radius based Authentication (with VLAN and QoS provisioning) |
| 802.1X Support | - |
| Wireless Radio : Wireless | |
| AP-AP Communications | - |
| RF Environment | Supported |
| Other | - |
| Wireless Radio : General | |
| MTBF | >450 000 hours, 2-year warranty, ServPak Extended Support available. |
| Wireless Radio : Power Requirement | |
| Input Power | - |
| Output Power | - |
| Power Consumption | 14 to 17 W max in MIMO 2x2 mode |
| Power Standards | 802.3at compliant |
| Wireless Radio : Physical Characteristics | |
| Temperature | OPERATING: -40º to 60ºC, -40º to 140º Fahrenheit; STORAGE: -50º to 70ºC, -58º to 158º Fahrenheit |
| Humidity | 100% relative humidity |
| IP Rating | IP67 |
| Dimensions Packaged | 388 x 346 x 428 mm (15.27 x 13.62 x 16.85 in) |
| Dimensions Unpackaged | 250 x 220 x 62 mm (9.84 x 8.66 x 2.44 in) |
| Weight (PACKAGED) | 10.0 Kg (22.04 lbs) |
| Weight (UNPACKAGED) | 1.6 Kg (3.53 lbs) |
| Standards and Certifications | USA: EMC/EMI: CFR47, FCC part 15, Subpart B (class A), Bluetooth: FCC Part 15 Subpart C 15.247,15.205, 15.207 & 15.209, UNII 1 and 3: FCC part 15, Subpart C 15.247, 15.205, 15.207 & 15.209, Subpart E 15.407, UNII 2A and 2C: FCC part 15, subpart E 15.407, 15.247, 15.205, 15.207 & 15.209 (Pending); CANADA: EMC/EMI: ICES-003 issue 7:2020 (class A), Bluetooth: RSS-247 issue 3 & RSS Gen Issue 5, UNII 3: RSS-247 issue 3 & RSS Gen Issue 5, UNII 2A and 2C: RSS-247 issue 3 & RSS Gen Issue 5 (Pending); EUROPE: EMC/EMI: EN 55032:2015+A1:2020, EN 55035:2017+A11:2020, RED: EN 301 489-1, EN 301 489-17, EN 301 489-19, EN 300 328, EN 301 893, EN 302 502, EN 303 413; UK: EMC/EMI: BS EN 55032:2015+A1:2020, BS EN 55035:2017+A11:2020, UKCA: EN 301 489-1, EN 301 489-17, EN 301 489-19, EN 300 328, EN 301 893, EN 302 502, EN 303 413 |
| Safety | IEC 62368-1:2018, EN IEC 62368-1:2020+A11:2020, BS EN IEC 62368-1:2020+A11:2020, UL 62368-1:2019, CSA C22.2 No. 62368-1:19 |
| Wind Loading | 180 km/h (112.5 mph) |
| Wireless Radio : Standards and Protocols | |
| Synchronization | - |
| Wireless Radio : Package Checklist | |
| Package Contents | One Stratum SX3-1020A unit with two RP-SMA connectors or One Stratum SX3-1021A with integrated antenna plus two RP-SMA connectors, One (SX3-1020A) or Three (SX3-1021A) RP-SMA weather proofing caps, Two M25 weather proofing cable glands, One power injector and country specific power cord, One full axis mounting kit, One Grounding kit, One Quick Installation Guide |