Puls
Brand: Puls
Model: SLR2.100
PULS SLR2.100 INTRODUCTIONThe SLR2.100 is a DIN-rail power supply with AC 230V/115V, DC 160 - 375V Input.As an Authorized Distributor of PULS, Manufacturers Automation Inc. (ManuAuto) offers a wide variety of Industrial Automation and Communication products across North Amer..
$0.00
Ex Tax:$0.00
Brand: Puls
Model: SLR5.100
PULS SLR5.100 INTRODUCTIONThe SLR5.100 is a DIN-rail power supply with AC 230V/115V, DC 210 - 375V Input.As an Authorized Distributor of PULS, Manufacturers Automation Inc. (ManuAuto) offers a wide variety of Industrial Automation and Communication products across North Amer..
$0.00
Ex Tax:$0.00
Brand: Puls
Model: SLV20.200
PULS SLV20.20 INTRODUCTIONThe Buffer Module Series is a supplementary device for regulated DC 24V power
supplies. It buffers load currents during typical mains faults and switching events, or load peaks.
Working principle
In times when the power supply provides sufficient voltage, the b..
$0.00
Ex Tax:$0.00
Brand: Puls
Model: SLZ02
PULS SLZ02 INTRODUCTIONInstead of snapping a SilverLine unit onto the DIN rail, you also
can screw it on a surface using the wall mounting set
SLZ02. This set consists of two aluminum profiles that replace
the existing profiles at the back of the unit.As an Authorized Distributor of PUL..
$0.00
Ex Tax:$0.00
Brand: Puls
Model: SLZ10
PULS SLZ10 INTRODUCTIONSLZ10-14 adapters allow mounting PULS switched-mode power supplies or other DIN rail units on the S7-300 rail, which differs from other rails. Thus, a separate DIN rail is not necessary
anymore. The adapter consists of a mounting bracket which is
put onto the S7-30..
$0.00
Ex Tax:$0.00
Brand: Puls
Model: SLZ11
PULS SLZ11 INTRODUCTIONSLZ10-14 adapters allow mounting PULS switched-mode power supplies or other DIN rail units on the S7-300 rail, which differs from other rails. Thus, a separate DIN rail is not necessary
anymore. The adapter consists of a mounting bracket which is
put onto the S7-30..
$0.00
Ex Tax:$0.00
Brand: Puls
Model: SLZ12
PULS SLZ12 INTRODUCTIONSLZ10-14 adapters allow mounting PULS switched-mode power supplies or other DIN rail units on the S7-300 rail, which differs from other rails. Thus, a separate DIN rail is not necessary anymore. The adapter consists of a mounting bracket which is put onto the S7-300 ..
$0.00
Ex Tax:$0.00
Brand: Puls
Model: SLZ13
PULS SLZ13 INTRODUCTIONSLZ10-14 adapters allow mounting PULS switched-mode power supplies or other DIN rail units on the S7-300 rail, which differs from other rails. Thus, a separate DIN rail is not necessary anymore. The adapter consists of a mounting bracket which is put onto the S7-300 ..
$0.00
Ex Tax:$0.00
Brand: Puls
Model: SLZ14
PULS SLZ14 INTRODUCTIONSLZ10-14 adapters allow mounting PULS switched-mode power supplies or other DIN rail units on the S7-300 rail, which differs from other rails. Thus, a separate DIN rail is not necessary anymore. The adapter consists of a mounting bracket which is put onto the S7-300 ..
$0.00
Ex Tax:$0.00
Brand: Puls
Model: UB10.241
PULS UB10.241 INTRODUCTIONThis uninterruptible power supply (UPS) controller, UB10.241, is an addition to standard 24V power
supplies to bridge power failures or voltage
fluctuations. Expensive downtimes, long restart
cycles, and loss of data can be avoided.
The DC-UPS includes a profe..
$0.00
Ex Tax:$0.00
Brand: Puls
Model: UB10.242
PULS UB10.242 INTRODUCTIONThis uninterruptible power supply (UPS) controller
UB10.242 is an addition to standard 24V power
supplies to bridge power failures of remote or
emergency systems, which must be kept fully in
operation, e.g., 72 hours.
The DC-UPS includes an internal temperatu..
$0.00
Ex Tax:$0.00
Brand: Puls
Model: UB10.245
PULS UB10.245 INTRODUCTIONThe UB10.245 uninterruptible power supply (UPS)
controller, along with a standard 24V power supply
and one 12V battery, can bridge power failures or
voltage fluctuations. This unit can supply and bridge
both a 24V load as well as a 12V load at the same
time. ..
$0.00
Ex Tax:$0.00
Brand: Puls
Model: UB20.241
PULS UB20.241 INTRODUCTIONThe UB20.241 uninterruptible power supply controller
(DC-UPS) is used in addition to a 24V power supply
and batteries to bridge power failures or voltage
fluctuations. This configuration can prevent expensive
downtimes, long restart cycles, and loss of data.A ..
$0.00
Ex Tax:$0.00
Brand: Puls
Model: UBC10.241
PULS UBC10.241 INTRODUCTIONThis uninterruptible power supply (UPS) controller, UBC10.241, with integrated battery, is a compact
addition to standard 24V power supplies to bridge
power failures or voltage fluctuations. Expensive
downtimes, long restart cycles, and data loss can
be avoid..
$0.00
Ex Tax:$0.00
Brand: Puls
Model: UF20.241
PULS UF20.241 INTRODUCTIONThe UF20 buffer module is a supplementary device for
regulated DC 24V power supplies, which can be used for
various purposes:
- Deliver DC power to bridge failures of the DC
voltage supply system.
- Extend the hold-up time after the loss of the AC power.
- D..
$0.00
Ex Tax:$0.00