MOXA ICF-1150I-M-ST Serial to Fiber Converter

Tags: Industrial Edge Connectivity , Serial Converters , Serial-to-Fiber Converters , Industrial Converters , Converters , MOXA ICF-1150 Series

MOXA ICF-1150I-M-ST Serial to Fiber Converter

Model: ICF-1150I-M-ST

Based on 0 reviews. - Write a review

$0.00

Ex Tax: $0.00

Add to Cart

Buy Now Enquire Now

Add to Wish List Compare this Product

Datasheet

MOXA ICF-1150I-M-ST FEATURES

1 x RS-232/422/485 Serial port (DB9-F, TB)
1 x 100BaseFX Port (Multi-mode ST connector)
2 KV Isolation protection for serial ports
5 KM Typical data transmission distance on fiber
12 to 48 VDC input power range
IP30-rated Metal body design
DIN-rail mounting
0 to 60°C operating temperature range

Over 40 Years in Business

Successful track record across Canada

Full Engineering Services

A powerhouse to provide consultation, training, and support

Strong Brand Portfolio

Top-notch products from superb global and local suppliers

Advanced Technologies

From legacy and mainstream to advanced Industry 4.0

Description
Specifications

MOXA ICF-1150I-M-ST INTRODUCTION

The ICF-1150 serial-to-fiber converters transfer RS-232/RS-422/RS-485 signals to optical fiber ports to enhance the transmission distance. When an ICF-1150 device receives data from any serial port, it sends the data through the optical fiber ports. These products not only support single-mode and multi-mode fiber for different transmission distances, but models with isolation protection are also available to enhance noise immunity. The ICF1150 products feature three-way communication and a rotating switch to set the pull high/low resistor for onsite installation.

Three-Way Communication

The ICF-1150 Series supports 2 serial ports, with a DB9 connector for RS-232 communication and a removable terminal block for RS-422 or RS-485 communication. The 3 ports (2 serial ports and one fiber port) are completely independent. When an ICF-1150 converter receives data from any one port, it will send the data through the other 2 ports. For example, once the ICF-1150 converter receives a command from the remote master through the fiber port, it will convert the signal and send the command through the RS-232 and RS-422/485 ports at the same time. If the user is monitoring a system running on an RS-485 network, there is no need to use an additional RS-232 to RS-485 converter to connect the laptop computer’s serial port to the RS-485 bus.

Rotary Switch for Setting the Pull High/Low Resistor

The RS-485 interface supports multidrop or daisy-chain connections, which system engineers will use to connect serial devices such as meters, RTUs, and readers together on the same bus. Since the number of serial devices on the same bus will cause the impedance of the data line to increase, the ICF-1150 allows users to tune the pull high/low resistor. Just rotate the switch to the appropriate value without removing the ICF-1150 from the DIN rail.

As an Authorized Distributor of MOXA, Manufacturers Automation Inc. (ManuAuto) offers a wide variety of Industrial Automation and Communication products across North America, including Canada (Ontario, Toronto) and the US. Buy the MOXA ICF-1150I-M-ST Serial to Fiber Converter online at a competitive price, with on-time delivery and fast shipping services. Our certified engineers are always available to support you.

You can also find the ICF-1150I-S-SC, ICF-1150I-S-SC-T, and ICF-1150I-M-SC-T models in the MOXA ICF-1150 Series.

MOXA ICF-1150I-M-ST CERTIFICATIONS

Converter : Interface
100Mb Fiber optic single mode (Megabit) Ports	No
100Mb Fiber optic multi mode (Megabit) Ports	Yes: 1 ST Port
USB	No
Serial port	Yes : 1 x RS-232/422/485 Serial port (DB9 female connector for RS-232 interface, 5-pin terminal block connector for RS-422/485 interface)
Other ports	No
Isolation	Yes : 2KV
Converter : Converter specifications
Maximum data transmission distance	5 Km on the fiber
Minimum output power converter	-5dBm
Sensitivity to receiving information	-20dBm
Wavelength	850nm
Data transfer speed ( Baudrate )	50 bps to 921.6 kbps (supports non-standard baudrates)
Require cable diameter	50/125 μm, 800 MHz, 62.5/125 μm, 500 MHz
Flow Control	ADDC (automatic data direction control) for RS-485
Protocols	-
Converter : Serial Signals
RS-232 Signals	TxD, RxD, GND
RS-422 Signals	Tx+, Tx-, Rx+, Rx-, GND
RS-485-4w Signals	Tx+, Tx-, Rx+, Rx-, GND
RS-485-2w Signals	Data+, Data-, GND
Converter : Power Requirements
Power Consumption (Output Adapter)	300 mA @ 12 to 48 VDC
Power Input Plugin ( Redundant )	No
Overload Current Protection	Supported
Reverse Polarity Protection	No
Input Voltage	12 to 48 VDC
Input Current	300 mA @ 12 to 48 VDC
Connector	Terminal block
Converter : General
Fan / Fanless	Fanless
MTBF	792,085 hrs
Converter : Physical Characteristics
Dimensions	30.3 x 70 x 115 mm (1.19 x 2.76 x 4.53 in)
Housing	Metal
Installation	DIN-rail mounting
Operating Temperature	0 to 60°C (32 to 140°F)
Operation Humidity	5 to 95% (non-condensing)
Standards and Certifications	EMC: EN 55032/35; EMI: CISPR 32, FCC Part 15B Class A; EMS: IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV, IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m, IEC 61000-4-4 EFT: Power: 4 kV; Signal: 2 kV, IEC 61000-4-5 Surge: Power: 4 kV; Signal: 1 kV, IEC 61000-4-6 CS: 150 kHz to 80 MHz: 3 V/m; Signal: 3 V/m, IEC 61000-4-8 PFMF; Environmental Testing: IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-3; Safety: UL 61010-2-201; Vibration: IEC 60068-2-6; Hazardous Locations: UL/cUL Class I Division 2 Groups A/B/C/D, ATEX Zone 2; IP30; Telcordia (Bellcore), GB
Storage Temperature	-40 to 85°C (-40 to 185°F)
Weight	330 g (0.73 lb)
Converter : LED Indicators
LED Per Port	No
Power	Yes